summaryrefslogtreecommitdiffstats
AgeCommit message (Expand)AuthorFilesLines
2012-01-11ENGR00171622 - FEC : workaround for Gb enet in sabrelite board.rel_imx_2.6.38_12.01.01caf/nxp/imx_v2009.08_12.01.01Fugang Duan1-3/+3
2011-12-31ENGR00171115 add fec support in mx6q sabreauto boardHake Huang3-38/+28
2011-12-30ENGR00171091 [MX6]Remove workaround for reset issueAnson Huang1-25/+0
2011-12-28ENGR00171008 MX6Q/MFGTOOL : disable the workaround for MFGTOOLHuang Shijie4-7/+4
2011-12-23ENGR00170876 Android: align boot commands with user guide.Zhang Jiejing2-3/+3
2011-12-22ENGR00170837 [MX6]Add temperatuer check into ubootAnson Huang1-0/+103
2011-12-21ENGR00170768 Android: Fix fastboot can't used on MX6Q SL MMC1 device.Zhang Jiejing2-3/+13
2011-12-20ENGR00162642: Fix bug in setting VDDSOC voltageRanjani Vaidyanathan1-2/+2
2011-12-20ENGR00160621 [MX6]Workaround for reset issueAnson Huang1-0/+25
2011-12-20ENGR00163697 - FEC : Adjust MX53 Network stream throughput.Fugang Duan5-0/+550
2011-12-20ENGR00169544 - FEC : fix "imx5x bootp command cannot work well".Fugang Duan1-59/+55
2011-12-20ENGR00170644: Enlarge mmc read size to 4M in default envTerry Lv4-4/+4
2011-12-16ENGR00170516 Enable the master mode for ENET PHY on MX6 SabreliteMahesh Mahadevan1-2/+2
2011-12-15ENGR00170405 Android: MX6Q_SL: Fix recovery key detectionZhang Jiejing1-2/+1
2011-12-15ENGR00170372 mx6q sabrelite: make TF card as default boot mediaXinyu Chen1-2/+2
2011-12-15ENGR00170299-3 Android: add android board configure file.Zhang Jiejing3-0/+319
2011-12-15ENGR00170299-2 Android:MX6Q_SL: add board support for recovery and fastboot.Zhang Jiejing1-0/+175
2011-12-15ENGR00170299-1 Android: add support fastboot functionZhang Jiejing8-4/+651
2011-12-13ENGR00169919 MX6Q ARM2 U-Boot : Support Pop CPU BoardEric Sun6-3/+539
2011-12-12ENGR00169741 UBOOT : DDR3 initialization based on the MX6Q ARDPrabhu Sundararaj3-386/+84
2011-12-09ENGR00169655 pcba : merge i2c recovery patch to pcbaRobin Gong1-0/+274
2011-12-07ENGR00169654 mx53_pcba: enable DDR auto-calibrationRobin Gong1-178/+620
2011-12-06ENGR00169500 mc34708 mx53_loco: 4s power off in QS boardRobin Gong1-0/+1
2011-12-05ENGR00163704: MX5X: add i2c recovery function in board_lateinit.Zhang Jiejing2-0/+530
2011-11-30 ENGR00163513 MX6Q-UBOOT : Add download_mode cmdEric Sun5-0/+59
2011-11-29ENGR00163370 Android: uboot: mx53_smd fix warnning messageZhang Jiejing1-2/+2
2011-11-28ENGR00163239-2 mc34708: enable extra charging circuitRobby Cai1-0/+11
2011-11-28ENGR00163239-1 mc34708: fix not charging issue in ubootRobby Cai1-3/+13
2011-11-25ENGR00163040 - FEC : Fix ethernet cannot work after system sleep.Fugang Duan1-6/+26
2011-11-25ENGR00162717 mx53_smd/mx53_loco DA9053: reset da9053 i2c and add dummy writeWayne Zou2-66/+164
2011-11-24ENGR00162937 - FEC: Fix FEC cannot load kernel accroding tftp.Fugang Duan1-0/+3
2011-11-23ENGR00162938 MX5: Add download_mode command in uboot to enter MFG download mode.Zhang Jiejing5-0/+49
2011-11-23ENGR00162874: Add enet clk change support for mx6Terry Lv1-7/+75
2011-11-21ENGR00162709 Add Support for MX6Q Sabre AutoEric Sun9-1/+2182
2011-11-18ENGR00162491 Android: MX53_SMD: enter recovery mode by key.Zhang Jiejing1-1/+16
2011-11-17ENGR00162570: MX6-Increase VDDSOC_CAP voltage to 1.2VRanjani Vaidyanathan1-0/+7
2011-11-17ENGR00162437 uboot mc34708 pcba : add spi support on mc34708Robin Gong3-8/+173
2011-11-16ENGR00155891 : Fix reboot stress test failed issueRobin Gong5-258/+371
2011-11-10ENGR00161852: remove u-boot build warnings for mx6qTerry Lv6-5/+12
2011-11-10ENGR00161860 Fix build issue when enable NAND in UbootAllen Xu1-0/+1
2011-11-10ENGR00161846 uboot mx6q_arm2: adjust IPU axi-id0/1 Qos valueJason Chen1-6/+6
2011-11-08ENGR00161691 Manufacturing update for Sabre-liteMahesh Mahadevan2-1/+266
2011-11-04ENGR00161354 MX6Q ARM2 U_BOOT: "mmc dev 0" or "mmc dev 1" cmds will hangAnish Trivedi2-6/+10
2011-11-04ENGR00161415: mc34708: set 1p5Robby Cai1-2/+2
2011-11-04ENGR00157106 uboot mx6q: adjust IPU axi-id0/1 Qos valueJason Chen1-3/+3
2011-11-04ENGR00161317 - MX6Q: Integrate plugin and dcd DRAM init script in uboot.Fugang Duan1-0/+300
2011-11-03ENGR00161373 Move the MAC address read from fuse code to MX6 SoC fileMahesh Mahadevan3-59/+21
2011-11-03ENGR00161296 Update the MX6 Sabre-lite environment option in the config fileMahesh Mahadevan1-7/+20
2011-11-03ENGR00161254 MX6Q: Add NAND support in UbootAllen Xu4-1/+91
2011-11-02ENGR00161294 Update MX6 code to read MAC address from fusesMahesh Mahadevan2-9/+20