summaryrefslogtreecommitdiffstats
AgeCommit message (Expand)AuthorFilesLines
2013-04-07ENGR00256543 mx6: Update equation for thermal sensor on i.MX6DLrel_imx_3.0.35_3.0.4caf/nxp/imx_v2009.08_3.0.0Anson Huang1-1/+1
2013-04-07ENGR00255481 mx6: Update equation for thermal sensorAnson Huang1-2/+23
2013-01-04ENGR00238834: mx6solo: add MFG support for mx6solo sabresd boardrel_imx_3.0.35_3.0.3rel_imx_3.0.35_3.0.1Jason Liu2-0/+304
2012-12-28ENGR00238371: mx6solo: sabresd: make system prompt indicate solo configJason Liu1-1/+1
2012-12-28ENGR00236902: mx6solo_sabresd: update the DDR script for solo-sabresdJason Liu1-107/+71
2012-12-13ENGR00236472 Update DDR script of ARD solo emulationAlejandro Sierra1-77/+56
2012-12-06ENGR000234991 MX6DL/ARD: Two boards met kernel dump during boot uprel_imx_3.0.35_3.0.0Jason Liu1-8/+8
2012-11-17ENGR00233933 i.mx6dl/sabresd: update the DDR script for i.MX6DL sabresd boardJason Liu1-96/+90
2012-11-17ENGR00233709-1 i.mx6dl/sabreauto: update the DDR script for i.mx6dl AI board:Jason Liu1-18/+17
2012-11-17ENGR00233881 Camera mx6q_sabresd:swap VGEN5&VGEN3 to fix camera streaks issueRobin Gong1-0/+27
2012-10-31ENGR00231891-2 gpmi: fix the 4k page size limitHuang Shijie1-2/+2
2012-10-31ENGR00231891-1 gpmi: replace the hardcodeHuang Shijie1-9/+3
2012-10-30ENGR00231581 BCH: fix the wrong data size macros in BCHHuang Shijie1-3/+8
2012-10-26ENGR00230981-1 pfuze:set all switches to PFM mode in standbyRobin Gong3-78/+75
2012-10-25ENGR00231155 add enable_wait_mode=off for all the mx6q/dl mfg ubootTony LIU11-11/+20
2012-10-19ENGR00230391: Fix build fail issue of sataTerry Lv3-3/+5
2012-10-18ENGR00230104 mx6q_sabreauto_nand: fix fec phy addressAdrian Alonso1-1/+2
2012-10-18ENGR00230334: Fix the mx53_smd_android configNitin Garg3-23/+44
2012-10-17ENGR00229931 Support for Solo configuration on ARD platformAlejandro Sierra9-0/+2569
2012-10-17ENGR00229789 AHCI Disable SATA PHY in initializationRichard Zhu3-0/+199
2012-10-16ENGR00229711 Add weim-nor argument on uboot config Quad/DLAlejandro Sierra2-2/+2
2012-10-16ENGR00229709 Support 2 processors at Linux bootAlejandro Sierra7-7/+7
2012-10-16ENGR00229817: i.mx6dl/mx6solo_sabresd_config: fix the build issueJason Liu2-1/+5
2012-10-16ENGR00229614 mx6: disable VDDPU by default, xpu will enable it if needed.Anson Huang1-1/+13
2012-10-12ENGR00229456 Support for 64bit DDR configuration for ARDAlejandro Sierra9-16/+125
2012-10-12ENGR00227413 Change configuration file names on AIAlejandro Sierra9-8/+8
2012-10-11ENGR00228238 i.mx6/i.mx6dl: sabresd: add solo-ddr32bit supportJason Liu3-2/+478
2012-09-27ENGR00223797-3 IPUv3:Wait for sw reset finishLiu Ying1-1/+4
2012-09-27ENGR00223797-2 MX6Q/DL CPU:Do not disable IPU display channelLiu Ying1-2/+4
2012-09-27ENGR00223797-1 MX6 SabreSD:Align IPU related clocks with kernelLiu Ying1-18/+164
2012-09-27ENGR00223794 MX6 SabreSD:Enable LVDS panel pwm backlightLiu Ying3-14/+21
2012-09-26ENGR00226048 Fix weim nor for mfg toolAlejandro Sierra2-3/+2
2012-09-24ENGR00225691 NAND support on i.MX6Solo ARDAlejandro Sierra3-0/+630
2012-09-21ENGR00225486 Support for spi-nor bootAlejandro Sierra3-0/+727
2012-09-14ENGR00224313:i.MX6 general:enable CONFIG_CMD_IMXOTP to fix the build errorimx-android-r13.5-betaimx-android-r13.4-gaEric Sun5-0/+60
2012-09-14ENGR00224291:i.MX6Q/ARM2-LPDDR2:enable CONFIG_CMD_IMXOTP to fix the build errorJason Liu1-0/+11
2012-09-14ENGR00224272: MFG:i.mx6q/ARM2 enable CONFIG_CMD_IMXOTP to fix the build errorJason Liu1-0/+11
2012-09-13ENGR00223788 mx6sl_evk: change boot args to boot from mmc/sdRobby Cai1-2/+2
2012-09-11ENGR00223027 Add support for nand on MFG for IMX6QAlejandro Sierra3-2/+304
2012-09-06ENGR00223236-1 [MX6]Change the temperature range to -40C ~ 125CAnson Huang1-6/+7
2012-09-06ENGR00222170: Add mx6sl_evk_android_config for mx6sl evk boardLiGang3-1/+97
2012-08-31ENGR00221503-2 imx6: add cpu serial number support.Zhang Jiejing33-0/+53
2012-08-31ENGR00221503-1 cmd_imxotp: refine the help of this command.Zhang Jiejing1-5/+10
2012-08-30ENGR00222005 mfgtool can't work on mx6slrel_imx_3.0.35_12.09.02Tony LIU2-1/+316
2012-08-29ENGR00219316-2: mx6q sabreauto enable lvds backlight by defaultAdrian Alonso1-25/+32
2012-08-29ENGR00219316-1: mx6 sabreauto: enable mxc_gpio supportAdrian Alonso11-9/+20
2012-08-28ENGR00221013 MX6 SabreSD:Disable LVDS panel CABC functionLiu Ying1-0/+38
2012-08-24ENGR00221332: U_BOOT: remove "boot" and "enable" from configs' nameTerry Lv8-7/+7
2012-08-24ENGR00221135: imx6x: clear PowerDown Enable bit of WDOG1_WMCRRobby Cai3-4/+45
2012-08-22ENGR00221150 Support spi-nor on manufacturing toolimx-android-r13.4-betaAlejandro Sierra3-0/+590