AgeCommit message (Expand)AuthorFilesLines
2017-04-14MLK-14693 mx7ulp: Change PLL rate calculation to avoid div 0rel_imx_4.1.33_7ulp_betacaf/nxp/imx_v2016.03_4.1.33_7ulp_betaYe Li1-2/+8
2017-04-14MLK-14689 mx7ulp: Workaround APLL PFD2 to 345.6MhzYe Li1-2/+2
2017-03-28MLK-14533 mx7ulp_evk: Change APLL and its PFD0 frequenciesYe Li2-2/+26
2017-03-17MLK-14483 mx7ulp: Fix SPLL/APLL clock rate calculation issueYe Li1-2/+6
2017-03-17MLK-14481 mx7ulp: Fix build issue when using M4 boot configurationYe Li1-1/+1
2017-03-17MLK-14480 mx7ulp_evk: Add netboot to default boot commandYe Li1-0/+1
2017-03-14MLK-14417 imx: Enable ACTLR.SMP bit for all i.MX cortex-a7 platformsYe Li2-7/+41
2017-03-02MLK-14312 mx7ulp: Fix incorrect DTB modification after using USBYe Li3-16/+43
2017-02-16MLK-13929-6 mx7ulp_evk: Enable the MIPI DSI splashscreenYe Li3-2/+93
2017-02-16MLK-13929-5 mx7ulp: Update clock and SoC functions for videoYe Li3-0/+88
2017-02-16MLK-13929-4 mx7ulp: Update registers and memory map for DSI and LCDIFYe Li2-3/+12
2017-02-16MLK-13929-3 video: Update LCDIF driver to support MIPI-DSIYe Li1-0/+44
2017-02-16MLK-13929-2 video: Add mipi panel driver for hx8363Ye Li2-0/+149
2017-02-16MLK-13929-1 video: Add MIPI DSI host controller driver for i.MX7ULPYe Li4-0/+815
2017-02-15MLK-13925-2 mx7ulp_arm2: Update LPDDR3/LPDDR2 script to latest versionYe Li3-30/+2
2017-02-15MLK-13925-1 mx7ulp_evk: Update LPDDR3 script to V1.4Ye Li2-18/+4
2017-02-14MLK-13924 mx7ulp: Fix APLL num and denom setting issueYe Li5-54/+2
2017-02-14MLK-13923 mx7ulp: Fix PCC register bits mask and offset issueYe Li1-2/+2
2017-02-09MLK-13899 ARM: mx7ulp: Correct the clock index on imx7ulpBai Ping1-1/+2
2017-02-08MLK-10647 armv7: Fix Dcache disable issue on i.MX7Ye.Li1-1/+4
2017-01-25MA-9213 imx: mx7ulp-evk: Add android supportSanshan Zhang5-0/+209
2017-01-23MLK-13816 mx7ulp_evk/arm: Fix pad setting issue for OTG_IDYe Li2-7/+13
2017-01-23MLK-13723 imx7d: restore epdc QoS setting after exit the lpsr modeRobby Cai2-0/+58
2017-01-20MLK-13761 board: imx7ulp: Fix system reset after a7 rtc alarm expired.Bai Ping2-0/+7
2017-01-19MLK-13782 net: fec_mxc: specify the registered eth index by dev_idAndy Duan1-2/+9
2017-01-19MLK-13777 net: fec_mxc: avoid transfer dev_id -1 to get mac address from fuseAndy Duan1-2/+2
2017-01-18MLK-13776 ocotp: Add fuse word checking before programming it on i.MX7ULPYe Li1-0/+18
2017-01-12MLK-13749 mx7ulp_arm2: Enable MX7ULP 10x10 ARM2 board buildYe Li3-0/+309
2016-12-23MLK-13645 mx7ulp: Modify FDT file to disable SD3.0 for mfgtoolYe Li2-0/+40
2016-12-16MLK-13624 configs: imx7ulp_evk: add net args for USB NFS bootAndy Duan1-1/+1
2016-12-14MLK-13602-3 mx6ullevk/arm2: Enable module fuse checking for mx6ull boardsYe Li4-0/+17
2016-12-14MLK-13602-2 epdc: Add disable fuse checkingYe Li1-0/+20
2016-12-14MLK-13602-1 mx6: Add i.MX6ULL fused modules checking supportYe Li2-1/+44
2016-12-12MLK-13586-2 mx7d_arm2/sabresd: Update ddr3 script to V2.0 for Bank interleaveYe Li9-109/+155
2016-12-12MLK-13586-1 mx7d_arm2: Update lpddr3 script to V2.0 for Bank interleaveYe Li6-60/+88
2016-12-08MXSCM-237 mx6dqscm: qwks: add support for qwks rev3Juan Gutierrez3-1/+32
2016-12-08MXSCM-236 mx6dqscm: adjust some ddr calibration parametersJuan Gutierrez1-13/+16
2016-12-08MLK-13584 configs: imx7ulp/imx6sll: enable Realtek usb-net dongle supportAndy Duan3-0/+3
2016-12-08MLK-13582 net: usb: r8152: allocate cache-aligned buffer for usb transfer buf...Andy Duan1-5/+15
2016-12-02MLK-13546 mx7ulp_arm2: Add validation board supportYe Li8-0/+980
2016-12-01MLK-13551: mx6ull: evk: lpddr2: add pre charge command allAdrian Alonso2-0/+3
2016-12-01MLK-13451-2: mx6ul: arm2: lpddr2: add pre charge command allAdrian Alonso2-0/+3
2016-12-01MLK-13451-1: mx6ul: evk: lpddr2: add pre charge command allAdrian Alonso2-0/+3
2016-12-01MLK-13540-2: mx6sx: arm2: lpddr2: add pre charge command allAdrian Alonso2-0/+6
2016-12-01MLK-13540-1: mx6sx: arm2: lpddr2: add pre charge command allAdrian Alonso2-0/+6
2016-12-01MLK-13539: mx6sl: evk: lpddr2: add pre charge command allAdrian Alonso2-0/+3
2016-12-01MXSCM-222 usb: fix swbst_mode to properly power usbJuan Gutierrez1-1/+1
2016-12-01MXSCM-213: remove dmfc from boot arguments for mx6scm boardsJuan Gutierrez1-5/+2
2016-12-01MXSCM-212: mx6dqscm: usb: fix usb_otg_id iomux pad settingsJuan Gutierrez1-0/+8
2016-12-01MLK-13545 mx7ulp: Add HAB boot supportYe Li4-0/+30