AgeCommit message (Expand)AuthorFilesLines
2012-03-19ENGR00177213 - U-Boot Changes for ICS iMX53 SMDimx-android-r14-alphacaf/nxp/maddev-imx-android-r10.3Oliver Brown2-20/+31
2012-03-12ENGR00175594: iMX53 SMD ICS default boot environmentOliver Brown1-7/+15
2012-03-02ENGR00175594: iMX53 SMD ICS default boot environmentJeff Kudrick1-2/+2
2012-02-22ENGR00172167: U-Boot changes for iMX53 on ICSOliver Brown2-1/+353
2011-12-23ENGR00170876 Android: align boot commands with user guide.Zhang Jiejing2-2/+2
2011-12-19ENGR00170541 mmc: avoid low capacity mmc card be set as sector modeXinyu Chen1-8/+3
2011-12-16ENGR00163704: MX5X: add i2c recovery function in board_lateinit.Zhang Jiejing2-0/+562
2011-12-16ENGR00163370 Android: uboot: mx53_smd fix warnning messageZhang Jiejing1-2/+2
2011-12-16ENGR00162938 MX5: Add download_mode command in uboot to enter MFG download mode.Zhang Jiejing5-0/+49
2011-12-16ENGR00162491 Android: MX53_SMD: enter recovery mode by key.Zhang Jiejing1-1/+16
2011-12-16ENGR00156389: turn off child clocks before reconfigure perclk_rootZhang Jiejing4-0/+60
2011-12-16ENGR00161380 mx53 smd: add bpp=32 into default bootargsXinyu Chen1-2/+2
2011-12-16ENGR00161252 mx53_smd: enlarge vmalloc vm area for HC.Zhang Jiejing1-1/+1
2011-12-16ENGR00160725 fastboot: fix the serial number display errorXinyu Chen1-1/+1
2011-12-16ENGR00159740 Android: Fastboot: enlarge max image size to 148MBZhang Jiejing5-5/+5
2011-12-16ENGR00159773 mx53 smd: align default bootargs with kernelXinyu Chen2-2/+2
2011-12-16ENGR00160885 mx53 smd: add uboot configure file for honeycombXinyu Chen2-0/+345
2011-09-13ENGR00156098 mx53_smd/mx53_loco: DA9053 I2C SDA stuck low issue on bootupWayne Zou2-2/+204
2011-09-06ENGR00155284 mx53_smd: move I2C access to board_init_late for system hang issueWayne Zou1-9/+12
2011-09-06ENGR00155240 mx53_smd: Fix a bug that hangs on printf() in board_initWayne Zou1-5/+1
2011-09-06ENGR00155138 mx53_smd/mx53_loco: Add i2c retry to fix DA9053 i2c NAK issueWayne Zou2-3/+20
2011-07-27ENGR00153749 Android: fix recovery boot command line.Zhang Jiejing4-4/+4
2011-07-27ENGR00153759 mx51: fix fastboot build failed without boot partition macroXinyu Chen1-0/+2
2011-07-27ENGR00143438 [MX50 RD3]DCDC_3V15 GPIO changeAnson Huang1-2/+2
2011-07-27ENGR00151310 mx53 smd: force warm reset as cold resetLily Zhang2-15/+9
2011-07-27ENGR00151695 mx53 ddr3: update ESDREF and MR0Lily Zhang3-9/+9
2011-07-27ENGR00153605 fastboot: uboot cannot be burned to boot partitionSammy He3-5/+16
2011-07-21ENGR00152843 mx51/3: align the android default env with documentXinyu Chen2-61/+21
2011-07-20ENGR00153394 mx50 rd3: make SDHC1 as default boot device for androidXinyu Chen2-48/+50
2011-07-14ENGR00152907 MX5X: update GPU default cmdline.Zhang Jiejing2-39/+39
2011-07-06ENGR00152755 MX6 Switch DRAM init script from plugin to DCD for emmc fastbootAnish Trivedi3-265/+146
2011-07-05ENGR00139206 MX6 USDHC eMMC 4.4 supportAnish Trivedi5-24/+75
2011-07-01ENGR00152439: MX51: PLL workaround should be implemented only for PLL1Ranjani Vaidyanathan1-2/+15
2011-06-29ENGR00152241 MX6: enable 1G speed mode for PHY and ENETZeng Zhaoming1-10/+41
2011-06-27ENGR00139198: iMX61 uBoot add ENET supportZeng Zhaoming4-69/+139
2011-06-24ENGR00144424 MX6: enable uboot for ARM2(SABREAUTO) CPU boardAnson Huang25-8/+10711
2011-06-22ENGR00151966: MX51 - Apply SW workaround for the PLL1 unlock HW issue.Ranjani Vaidyanathan1-10/+43
2011-06-21ENGR00151892 MX50: Workaround to prevent PLL1 from losing lockAnish Trivedi1-24/+59
2011-06-10ENGR00151187 MX53 SMD: Kernal stopped Usb driver after reseting in stop modeWayne Zou1-1/+14
2011-06-09ENGR00144224: MX53: Add MMU mapping for all peripheralsTerry Lv4-36/+84
2011-06-01ENGR00144389 mx53 QS Ripley: change VCC from 1.35V to 1.3V QS Ripley boardWayne Zou1-2/+2
2011-05-26ENGR00144060 MX53_SMD: recovery android, update recovery command for emmc.Zhang Jiejing1-1/+1
2011-05-23ENGR00143837 mx50 rd3: support android boot from RD3 NAND deviceXinyu Chen2-12/+7
2011-05-20ENGR00143704: U_BOOT: Nand oobsize is wrong in some nand chipsTerry Lv2-7/+11
2011-05-20ENGR00143298: Reinit uart after using clk commandTerry Lv2-0/+6
2011-05-20ENGR00143302 Add mc34708 pmic support on loco/Ripley boardZou Weihua -wayne zou1-10/+47
2011-05-19ENGR00143570 mx53: change the default environment settingLily Zhang4-10/+14
2011-05-18ENGR00143613 uboot: update the android ramdisk load addressXinyu Chen3-3/+3
2011-05-16ENGR00143469 mx53 smd: pull down GPIO_9 to reset the boardLily Zhang1-0/+15
2011-05-16ENGR00143461 mx51 evk: increase VDDGP as 1.1v for 800MHZLily Zhang1-0/+5