AgeCommit message (Expand)AuthorFilesLines
2011-06-01ENGR00144389 mx53 QS Ripley: change VCC from 1.35V to 1.3V QS Ripley boardrel_imx_2.6.35_11.05.01caf/nxp/imx_v2009.08_11.05.01Wayne Zou1-2/+2
2011-06-01ENGR00143302 Add mc34708 pmic support on loco/Ripley boardZou Weihua -wayne zou1-10/+47
2011-05-20ENGR00143570 mx53: change the default environment settingLily Zhang4-10/+14
2011-05-20ENGR00143613 uboot: update the android ramdisk load addressXinyu Chen3-3/+3
2011-05-16ENGR00143469 mx53 smd: pull down GPIO_9 to reset the boardLily Zhang1-0/+15
2011-05-16ENGR00143461 mx51 evk: increase VDDGP as 1.1v for 800MHZLily Zhang1-0/+5
2011-05-16ENGR00143457: Don't let ROM copy .bss sectionJason Liu8-5/+9
2011-05-16ENGR00143442 uboot: support android spi boot and mfg on mx50 rd3 boardXinyu Chen4-4/+443
2011-05-14ENGR00143428 mx53 ard RevB: use internal clock for sataLily Zhang1-0/+19
2011-05-10ENGR00142995 MX50: Enable uSDHC instead of eSDHC for SDR modeAnish Trivedi10-13/+103
2011-05-10ENGR00143178 mx53 ARD DDR3 board: add MFG tool supportLily Zhang2-0/+231
2011-04-29ENGR00142740 mx50 rdp: mfg support GPMI nand by command lineXinyu Chen1-2/+2
2011-04-22ENGR00142497 Android: MX53_SMD: check eMMC and SD recovery file.Zhang Jiejing1-38/+42
2011-04-20ENGR00142322: mx53-smd: spi nor: can't erase 0x200000 sizeTerry Lv2-14/+14
2011-04-20ENGR00141885: mx50 and mx53 reboot fail when booting from spi norTerry Lv2-2/+15
2011-04-18ENGR00142259 set UART2_RXD (GP6_11) to highRobby Cai1-0/+10
2011-04-16ENGR00142247 MX50: Add PD+3 routine for all DDR typesRobby Cai1-18/+34
2011-04-16ENGR00142246 MX50 Update DDR2 script to use more optimized settingsRobby Cai1-123/+64
2011-04-11ENGR00141335-3: Add CONFIG_EMMC_DDR_PORT_DETECT to mx53 and mx50config filesTerry Lv17-12/+47
2011-04-11ENGR00141335-2: get more accurate ipg_per clock frequencyTerry Lv1-17/+24
2011-04-11ENGR00141335-1: Use bypass way to set ddr dll in mx53Terry Lv1-1/+1
2011-04-08ENGR00141556: Fix copyright issueTerry Lv26-78/+44
2011-03-31ENGR00141410 MX50 RD3: Set GPIO4_16 to Enable DCDC_3V15Robby Cai1-2/+12
2011-03-31ENGR00141363: change mx53 uart clk parent to pll2Jason Chen8-35/+60
2011-03-25ENGR00141157: Add m25p32 spi nor config to mx53_smd_androidTerry Lv1-6/+18
2011-03-24ENGR00141129: Add m25p32 spi_nor support for mx53_smdTerry Lv3-12/+125
2011-03-23ENGR00141058 MX50_RDP: Android Fix typo in recoevry command linerel_imx_2.6.35_11.03.00Zhang Jiejing1-1/+1
2011-03-23ENGR00141000 MX50_RDP: add android recovery support.Zhang Jiejing3-1/+129
2011-03-23ENGR00140537 mx53: update vddgp according to new data sheetZhou Jingyu1-0/+33
2011-03-22ENGR00140982 MX53 Increase VDDGP to 1.25V for 1 GHzAnish Trivedi3-6/+6
2011-03-22ENGR00140872 Add MX50 RD3 SupportRobby Cai4-10/+595
2011-03-21ENGR00140873: MMC may wrongly regconize 2GB eMMC as high capacityTerry Lv1-2/+4
2011-03-21ENGR00140824 Android: Enable fastboot support for mx50 rdpSammy He5-4/+391
2011-03-20ENGR00140825: Add mx53 to2.1 chip id recognitionTerry5-4/+19
2011-03-18ENGR00140486 Add SPI NOR Flash M25P32 driverRobby Cai3-1/+565
2011-03-17ENGR00140767: Improve mx5x DDR clock functionTerry3-47/+41
2011-03-17ENGR00140750 mx53smd: set the default DDR size to 512MB for android configureXinyu Chen1-3/+2
2011-03-16ENGR00140692 Update for DDR3-based MX53 SABRE Auto boardsMahesh Mahadevan4-4/+413
2011-03-14ENGR00140089 MX53_SMD: update command line.Zhang Jiejing1-3/+3
2011-03-02ENGR00138533: Fix sata write operation random failure issueTerry Lv1-1/+3
2011-03-02ENGR00139747: Read fuse to distinguish between mx53 revA and revBTerry Lv2-7/+43
2011-03-01ENGR00139924 mx53 smd &loco: set bootup vdd GP to 1.2vZhou Jingyu2-0/+6
2011-02-14ENGR00139120: Correct CONFIG_CMD_MMC to CONFIG_CMD_IIM for iimTerry Lv7-8/+8
2011-01-31ENGR00138689 MX50 Update LPDDR2 script to use more optimized settingsAnish Trivedi1-315/+42
2011-01-28ENGR00138635 MX50 Update mDDR script to use more optimized settingsAnish Trivedi1-55/+55
2011-01-28ENGR00138549 Android fastboot: Support eMMC4.4 on imx53_smdrel_imx_2.6.35_11.01.00Sammy He6-28/+64
2011-01-27ENGR00118558 MX51/MX53: change the boot command of android boards.Zhang Jiejing3-10/+14
2011-01-26ENGR00138534 Disable splashimage support defaultly for PDKLiu Ying3-3/+0
2011-01-27ENGR00138422-3 Android fastboot: Pass block offset to cmd_fastbootSammy He2-28/+28
2011-01-26ENGR00138422-2 Add SATA storage support for android fastbootSammy He5-106/+138