summaryrefslogtreecommitdiffstats
AgeCommit message (Expand)AuthorFilesLines
2017-05-02MLK-14707 fsl_esdhc: Fix eMMC 1.8v setting issuerel_imx_4.1.15_2.1.0_gacaf/nxp/imx_v2016.03_4.1.15_2.0.0_gaYe Li1-4/+4
2017-04-19MLK-13508-2 mx6sllarm2: Update DDR script to v2.3Ye Li3-9/+11
2017-04-19MLK-13508-1 mx6sllevk: Update DDR script to v2.2Ye Li2-4/+5
2017-03-10MXSCM-267 mx6dqscm: set hdmi as primary display for qwks boardJuan Gutierrez1-2/+8
2017-03-10MXSCM-266 mx6dqscm: increase lpddr2 voltage to 1.25VJuan Gutierrez1-2/+2
2016-12-08MXSCM-237 mx6dqscm: qwks: add support for qwks rev3Juan Gutierrez3-1/+32
2016-12-08MXSCM-236 mx6dqscm: adjust some ddr calibration parametersJuan Gutierrez1-13/+16
2016-12-01MLK-13551: mx6ull: evk: lpddr2: add pre charge command allAdrian Alonso2-0/+3
2016-12-01MLK-13451-2: mx6ul: arm2: lpddr2: add pre charge command allAdrian Alonso2-0/+3
2016-12-01MLK-13451-1: mx6ul: evk: lpddr2: add pre charge command allAdrian Alonso2-0/+3
2016-12-01MLK-13540-2: mx6sx: arm2: lpddr2: add pre charge command allAdrian Alonso2-0/+6
2016-12-01MLK-13540-1: mx6sx: arm2: lpddr2: add pre charge command allAdrian Alonso2-0/+6
2016-12-01MLK-13539: mx6sl: evk: lpddr2: add pre charge command allAdrian Alonso2-0/+3
2016-11-30MXSCM-222 usb: fix swbst_mode to properly power usbJuan Gutierrez1-1/+1
2016-11-30MXSCM-213: remove dmfc from boot arguments for mx6scm boardsJuan Gutierrez1-5/+2
2016-11-30MXSCM-212: mx6dqscm: usb: fix usb_otg_id iomux pad settingsJuan Gutierrez1-0/+8
2016-11-22MLK-13486: imx: logos: use NXP logoPeng Fan1-0/+0
2016-11-21MLK-13499 imx6sll: add epdc splash screen supportRobby Cai6-4/+458
2016-11-16MLK-13440-5 fsl_usdhc: Remove the CONFIG_SYS_FSL_ESDHC_FORCE_VSELECTYe Li1-4/+0
2016-11-16MLK-13440-4 warp: Replace CONFIG_SYS_FSL_ESDHC_FORCE_VSELECT by using vs18_en...Ye Li2-2/+1
2016-11-16MLK-13440-3 mx6sll_arm2: Update USDHC2 parameter for using 1.8V I/OYe Li1-6/+2
2016-11-16MLK-13440-2 mx6sllevk: Update USDHC2 parameter for using 1.8V I/OYe Li1-6/+2
2016-11-16MLK-13440-1: fsl_usdhc: Add configuration parameter for using fixed 1.8V I/OYe Li2-0/+6
2016-11-16MLK-13405-4 mx6sll-arm2: change the eMMC reset pad to 1.8vHaibo Chen1-2/+6
2016-11-16MLK-13405-3 mx6sll-evk: change the eMMC reset pad to 1.8vHaibo Chen1-2/+6
2016-11-16MLK-13410 Android: Change to set mfgtool only for none android u-bootYe Li1-2/+2
2016-11-16MLK-13392 configs: add extra misc NAND partition for AndroidHan Xu9-25/+25
2016-11-16MLK-13373 mx6sll: update ddr script to 2.1.1Peng Fan2-4/+4
2016-11-16MLK-13352 imx: mx6sll: support mx6sllevk boardPeng Fan8-0/+1043
2016-11-16MLK-13360 mx6sll_arm2: Fix typo issue in mx6sll LPDDR2 ARM2 defconfigYe Li1-1/+1
2016-11-16mmc: sd: optimize erasePeng Fan1-2/+7
2016-11-16mmc: sd: extracting erase related information from sd statusPeng Fan2-0/+77
2016-11-16MLK-13336 mx6sll_arm2: Update LPDDR2 script to v2.1Ye Li2-3/+10
2016-11-16MLK-13335 mx6sl: Fix build break for all i.MX6SL boardsYe Li2-2/+2
2016-11-16MLK-13331 mx6sll_arm2: Output WDOG_B signal to reset PMICYe Li1-0/+8
2016-11-16MLK-13330 mx6sll_arm2: Update LPDDR3 script to v2.2Ye Li2-7/+14
2016-11-16MLK-13311 configs: mx6sll_lpddr3_arm2: Enable network functionPeter Chen1-0/+5
2016-11-16MLK-13307-15 imx: mx6sll: add mx6sll arm2 supportPeng Fan11-0/+1352
2016-11-16MLK-13307-14 imx-common: lcdif: update lcdif regs for i.MX6SLLPeng Fan1-4/+5
2016-11-16MLK-13307-13 OCOTP: Update OCOTP driver to support i.MX6SLLYe Li1-8/+10
2016-11-16MLK-13307-12 imx: mx6: update ccm macro settings for i.MX6SLLPeng Fan1-6/+71
2016-11-16MLK-13307-11 imx: mx6sll: disable LDOPeng Fan1-0/+2
2016-11-16MLK-13307-10 mx6_common: correct loadaddr and text base for i.MX6SLLPeng Fan1-1/+1
2016-11-16MLK-13307-9 imx: mx6sll: add Kconfig entry for i.MX6SLLPeng Fan1-0/+4
2016-11-16MLK-13307-8 imx-common: cache: configure L2 Cache for i.MX6SLLPeng Fan1-1/+1
2016-11-16MLK-13307-7 imx: mx6sll: update soc settingsPeng Fan1-5/+16
2016-11-16MLK-13307-6 imx: mx6sll: add clock support for i.MX6SLLPeng Fan1-36/+158
2016-11-16MLK-13307-5 imx: mx6sll: add iomux settingsPeng Fan2-4/+10
2016-11-16MLK-13307-4 imx-common: timer: add i.MX6SLL supportPeng Fan1-2/+4
2016-11-16MLK-13307-3 imx: mx6sll: update register addressPeng Fan1-41/+52