summaryrefslogtreecommitdiffstats
path: root/arch
AgeCommit message (Expand)AuthorFilesLines
2020-11-29MLK-25046 imx: bee: Fix build warning of flush_dcache_rangeYe Li1-0/+1
2020-11-18MLK-25010 iMX8MN: Update low_drive_gpu_freq for new GPU node pathYe Li1-16/+20
2020-11-16MLK-25003-2 iMX8M: Update thermal and PMU kernel nodes for dual/single coresYe Li1-0/+73
2020-11-16MLK-25003-1 iMX8MN: Add support for 11x11 UltraLite part numberYe Li4-17/+43
2020-11-08MLK-24978 imx8dxl_evk: Fix pad settings for LCD color issueYe Li1-21/+23
2020-11-09MLK-24975 arch: mach-imx: imx8m: fix unique_id read error for imx8mpAlice Guo1-0/+11
2020-11-08MLK-24971-2 imx8mp_evk: Set GIC clock to 500Mhz on LPDDR4 EVK onlyYe Li1-3/+0
2020-11-06MLK-24968 imx8m: soc: update fuse pathPeng Fan1-5/+11
2020-11-06LF-2637 mx6: fuse: update node pathPeng Fan1-0/+78
2020-11-06MLK-24907 imx8mp: configure GIC clk to 500MPeng Fan1-1/+3
2020-11-03MLK-24958-4 DTS: imx8dxl-evk: Add dedicated DTS for LCD enablemenntYe Li2-0/+84
2020-11-03MLK-24958-3 video: mxsfb: Add iMX8DXL support to LCDIF driverYe Li2-3/+5
2020-11-03MLK-24958-2 DTS: imx8qxp/dxl: Update LCDIF clock namesYe Li2-9/+9
2020-10-30MLK-24941 arm: dts: set sensor regulator always on for imx6q/qp/dlClark Wang1-0/+1
2020-10-13MLK-24887 iMX8MM: Add new LPDDR4 EVK supportYe Li8-64/+324
2020-10-12MLK-24877-1: nandbcb: nand support for i.MX8MPHan Xu1-5/+7
2020-10-09MLK-24868: dts: arm: imx8mn ab2 fix regulator settingsAdrian Alonso2-62/+80
2020-10-09MLK-24860-2 imx8mp_evk: Add DDR4 EVK board supportYe Li4-0/+75
2020-09-18MLK-24817 iMX8MN: Add iMX8MN 11x11 DDR3L EVK supportYe Li4-0/+48
2020-09-18MLK-24786 imx8dxl_ddr3_evk: Add UUU support to second USB portYe Li1-0/+21
2020-09-16MLK-24792 imx8dxl: Rename iMX8DXL DDR3 VAL to EVK boardYe Li4-5/+5
2020-09-15MLK-24766-6 arm64: dts: imx8qxp-val: enable lpspi0 supportClark Wang3-2/+69
2020-09-15MLK-24766-5 arm64: dts: imx8dxl: enable lpspi3 supportClark Wang2-3/+56
2020-09-15MLK-24766-4 arm: dts: imx7ulp: enable lpspi3 supportClark Wang2-11/+10
2020-09-15MLK-24766-3 imx7ulp-clk: add lpspi clk enable functionClark Wang2-1/+43
2020-09-08MLK-24750-1 spl: Allow iMX7/8/8M to overwrite spl_board_boot_deviceYe Li1-42/+38
2020-09-07MLK-24720 imx8mq_ddr4_val: Change to use iMX8M DDR driverYe Li1-0/+1
2020-09-05MLK-24616 imx8: misc: Fix hardcoded LPUART0 for LPCGYe Li1-1/+4
2020-08-31MA-17788 Boot time refine for automotiveJi Luo4-135/+248
2020-08-18MLK-24510: board: freescale: imx8mm ddr4 audio board 2.0Adrian Alonso3-0/+56
2020-08-14MLK-24504 DTS: imx8dxl: Fix GPIO seq ID issueYe Li4-2/+6
2020-08-14MLK-24492 mx7 Align IOMUX GRP offset with mx6Silvano di Ninno1-0/+1
2020-08-13MLK-24474: Add command to set SECO FIPS modeFranck LENORMAND1-0/+71
2020-08-11MLK-24482 imx8dxl: Update chip revision to recognize A1Ye Li2-0/+6
2020-08-10MLK-24479 DTS: imx8dxl-evk: Update and enable PCIEYe Li1-6/+5
2020-08-10Revert "LF-1936 imx8mq: remove dead switch"Peng Fan1-0/+3
2020-08-10Revert "LF-1934 imx8mm: remove dead switch"Peng Fan1-0/+2
2020-08-10Revert "LF-1928 imx7ulp: scg: remove dead switch"Peng Fan1-0/+2
2020-08-10LF-1937 imx8mq: fix SSCG_PLL_REFCLK_SEL_xPeng Fan1-4/+4
2020-08-10LF-1930 imx8mq: fix FRAC_PLL_REFCLK_SEL_MASKPeng Fan1-1/+1
2020-08-10LF-1936 imx8mq: remove dead switchPeng Fan1-3/+0
2020-08-10LF-1934 imx8mm: remove dead switchPeng Fan1-2/+0
2020-08-10LF-1928 imx7ulp: scg: remove dead switchPeng Fan1-2/+0
2020-08-10LF-1963 imx7: ccm: correct target interface numPeng Fan1-1/+1
2020-08-04LF-1861 imx8m: clock: Fix ecspi1 clock settingYe Li1-0/+1
2020-08-04LF-1873 imx8: snvs_security: Fix dead code in apply_tamper_pin_list_configYe Li1-7/+7
2020-08-04LF-1876 imx8: snvs_security: Fix dead code in apply_snvs_dgo_configYe Li1-9/+9
2020-08-04LF-1895 imx8: Fix unsigned compared with negative valueYe Li1-2/+2
2020-08-04LF-1866 imx: nandbcb: Fix potential overflow in nandbcb_set_boot_configYe Li1-1/+1
2020-08-04LF-1868 imx: nandbcb: Fix potential overflow in fill_dbbt_dataYe Li1-1/+1