path: root/board
AgeCommit message (Expand)AuthorFilesLines
2018-12-12MLK-20542 imx8qm: xen: mek: add magic numberPeng Fan1-2/+7
2018-12-11MLK-20528-2 imx8: Enable clocks LPCGYe Li4-0/+52
2018-11-20MLK-20394 imx8mq: Update the ddrc QoS setting for B1 chipBai Ping1-6/+10
2018-11-12Revert "[iot] Decrease panbell DDR frequency to 1600 MTS"Keun-young Park2-1889/+2230
2018-11-12[iot] Support authenticated unlockJi Luo1-2/+2
2018-11-12[iot] Load Trusty to different address for AIY 1G/3G ddr boardJi Luo1-0/+19
2018-11-12Use stdint for uboot.Yu Shan1-0/+19
2018-11-12Set different bootargs for imx8m_phanbell based on ram capacityfaqiang.zhu1-0/+10
2018-11-12Set VDD_ARM to 0.85v and turn off VDD_GPU and VDD_VPUfaqiang.zhu1-0/+9
2018-11-06MLK-20257 imx8qxp_arm2: Fix NAND boot reset issueYe Li1-0/+6
2018-11-02MLK-20163-03 board: imx8mq_evk: Refact the imx8mq dram init codeBai Ping10-1734/+4053
2018-11-02MLK-10163-01 imx8mq: Re-desine the dram_pll_init functionBai Ping2-2/+2
2018-11-02MLK-20160-2 imx8qm/qxp: Fix build error when OTG gadget is enabledYe Li2-1/+13
2018-11-02MLK-20051-2 imx8mq_arm2: Split DDR to two banks for iMX8MQ DDR4 ARM2Ye Li1-6/+17
2018-11-02MLK-20154-2 imx8mm_ddr3l_val: Add SPI NOR supportYe Li1-13/+1
2018-11-02MLK-19877-1: iMX8QXP: Add NAND SPL supportTeo Hall2-58/+75
2018-11-02MLK-20116-3 mx7ulp_evk: Remove GPIO codes for USB IDYe Li1-35/+0
2018-10-26MLK-20106: enable nand CE_1 in i.MX8MM EVK IOMUX settingHan Xu1-0/+1
2018-10-25MLK-20044 imx8mm_evk: update DDRC RFSHCTL3 for DDR4 timingBai Ping1-1/+1
2018-10-24MLK-20049-2 imx8mm_val: Add DDR3L validation board supportYe Li12-8/+3640
2018-10-16iMX8QX mek SPL: Add FIT image loading supportAbel Vesa1-0/+10
2018-10-16iMX8QM mek SPL: Add FIT image loading supportAbel Vesa1-0/+10
2018-10-12MLK-19904 imx8mm_ddr4_evk: Update the mr value settingBai Ping1-7/+7
2018-10-10MLK-19881 imx8mq_arm2: Fix SPL issue to support uuuYe Li1-0/+5
2018-10-01MLK-19777-03: imx8mm_evk: Optimize the ddr4 init flowBai Ping15-4707/+1502
2018-10-01MLK-19777-02 imx8mm: rename lpddr4_timing variable to dram_timing.Bai Ping2-2/+2
2018-09-29MLK-19762 imx8mm: Fix i2c pad issue in SPLYe Li2-2/+2
2018-09-28MLK-19769-1 iMX8QM SPL: Add QSPI support for imx8qm_mekAbel Vesa1-0/+22
2018-09-28MLK-19770-1 iMX8QM SPL: board: imx8qm_mek: Add spl implementationAbel Vesa2-0/+207
2018-09-27MLK-19183-14: iMX8QXP SPL: Add ARM2 board supportTeo Hall3-2/+233
2018-09-20MLK-19645 mx6ulz_evk: Fix fdt_file variable issueYe Li1-1/+1
2018-09-20MLK-19625 mx6ulz_evk: Disable the FEC driver and support USB2NET dongleYe Li1-1/+3
2018-09-18MLK-19183-12 iMX8QXP SPL: Add QSPI support for imx8qxp_mekAbel Vesa1-0/+20
2018-09-17MLK-19599 imx8mm_ddr4_evk: Add NAND boot supportYe Li1-8/+18
2018-09-14MLK-19589 baord: imx6ulz: add imx6ulz supportBai Ping1-0/+5
2018-09-12MA-12669 imx8qm/qxp_mek: Guard TCPC codes with proper configLuo Ji2-3/+18
2018-09-11MLK-19541 imx8mm_evk: Add imx8mm DDR4 EVK CPU board supportYe Li16-5/+4715
2018-09-07MLK-19483: i.MX6/7: pack qspi header with u-boot for i.MX6/7 qspi u-bootHan Xu1-0/+128
2018-09-03MLK-19380 imx8mq_evk: update the ddr controller QoS settingTom.zheng1-6/+10
2018-08-30MA-12552 Adjust SPL malloc pool and stack addressLuo Ji1-10/+19
2018-08-30MA-12551 [iot] Change configs to enable uuu on AIYLuo Ji1-0/+3
2018-08-21MLK-19263-2 imx8mq_evk: Adjust SPL malloc pool and stack addressYe Li1-10/+20
2018-08-21MLK-19223 arm: imx8mm: add MXC_XXX_CLK clock map for imx common codeHaibo Chen2-4/+4
2018-08-21MA-12244-1 [Android] Load HDMI RX firmware for imx8qmLuo Ji1-1/+7
2018-08-21[iot] Change VDD_DRAM to 0.9V which is valid in datasheetZhang Bo1-2/+2
2018-08-21[iot] Change VDD_3V3 to 3.1V and VDD_1V8 to 1.695VZhang Bo1-0/+6
2018-08-20[iot] Decrease panbell DDR frequency to 1600 MTSLuo Ji2-2230/+1889
2018-08-20[iot] Support 1G DDR AIY boardLuo Ji4-785/+2028
2018-08-20MA-12124 [Android] Fix build warnings for u-bootLuo Ji1-1/+0
2018-08-20[iot] Move i2c_setup calls to board_initBraden Kell1-7/+6