path: root/board
AgeCommit message (Expand)AuthorFilesLines
2019-07-30MLK-22179-2 imx8mn_evk: Enable FSPI DQS loopback for high freqYe Li1-0/+1
2019-07-12MA-15087-4 Support mmc loader for imx8mn_evkHaoran.Wang1-0/+16
2019-07-09MLK-22240 imx8m: Fix GPR setting issue for ENET TX CLK selectYe Li7-8/+8
2019-07-08MA-14981-1 Add evk_imx8mm 4GB DDR supportJi Luo3-0/+1877
2019-06-25MLK-22105-3 imx8/imx8m: spl: Move bss clean up before arch_cpu_initYe Li11-55/+22
2019-06-21MLK-22080 imx8mn_evk: add SPL and u-boot build for nominal modeYe Li2-0/+12
2019-06-19MA-14989-1 Add 2GB ddr support for AIYJi Luo4-6/+1766
2019-06-12MLK-22001 imx8mn_evk: tune DDR4 QoS to improve performanceJian Li1-9/+6
2019-06-05MLK-21950-02 board: imx8mn_evk: update the ddr performance settingJacky Bai1-15/+12
2019-05-30MA-14893-2 Add android build target for imx8mnJi Luo1-0/+9
2019-05-29MLK-21889-11 imx8mn_evk: Add board codes and defconfig for iMX8M Nano EVKYe Li5-0/+2207
2019-05-21MLK-21745-02 board: imx8mm_val: change the ddr init to the common driverJacky Bai24-8287/+2886
2019-05-21MA-14785-1 Limit display resolution to 720p for 1G ddr AIYJi Luo1-2/+2
2019-04-18MA-14629 fix build warnings for varialbe initialization and type castfaqiang.zhu1-1/+1
2019-04-11MA-14511 AIY: Change the GPU reserved memory to 32MJi Luo1-1/+1
2019-04-11MA-14521 AIY: Explicitly set USB Switch (PTN5150A) to UFPMichael Brooks1-0/+46
2019-04-11MA-14520 AIY: Limit USB to High SpeedMichael Brooks1-1/+5
2019-04-11MA-14519 Phanbell: Explicitly set buck voltages in SPLMichael Brooks1-10/+19
2019-04-01MA-14494 Support DVT AIY 1G boardJi Luo5-35/+1769
2019-03-21MLK-21214 board: imx8mm_evk: Use the default QoS setting for imx8mm_evk ddr4Jacky Bai1-18/+0
2019-03-15MLK-21068 board: imx8mm_evk: update the lpddr4 timing configJacky Bai1-414/+288
2019-02-25MLK-20987-2 imx8qm/qxp: spl: Clean the flexspi power up/down warningYe Li2-8/+16
2019-02-25MLK-20987-1 imx8qm/qxp: spl: Fix SPL flexspi boot breakYe Li2-4/+4
2019-02-26MA-14129 Update ddr training code for imx8mq_aiyJi Luo9-2864/+1739
2019-02-25MLK-20980 imx8qm/qxp_mek: Set kernel fdt according to M4 bootYe Li2-0/+26
2019-02-11MLK-20886-11: imx8qxp_mek: Remove GPIO1_1 for IO Expander resetYe Li1-13/+0
2019-02-10MLK-20902 imx8mm_evk: Change VDD_DRAM to 0.975vYe Li1-2/+2
2019-01-24MLK-20796 imx8qm_mek: Remove base board resetYe Li1-4/+0
2019-01-24MLK-20794-2 imx8qxp_arm2: Add support for 17x17 validation boardsYe Li3-5/+5
2019-01-21MLK-20783 imx8mm: spl: Change VDD_SOC to typical value 0.85VYe Li2-2/+8
2019-01-21MLK-20781-4 mx7ulp_evk: Enable new mipi panel RM68200_WXGAYe Li1-5/+38
2019-01-08MLK-20559-8 imx8qm/qxp: Update MEK board codes to support UUUYe Li2-12/+69
2019-01-08MLK-20559-7 tcpc: Bypass the vbus disable for SPLYe Li1-2/+5
2018-12-26MLK-20655-2 imx8qm/qxp: Fix wrong gpio resource used in SPLYe Li4-5/+5
2018-12-19MLK-20583-2 imx: mx6sabreauto: Enable OCOTP CTRL clock in DCD and pluginBreno Lima5-5/+5
2018-12-19MLK-20583-1 imx: mx6sabresd: Enable OCOTP CTRL clock in DCD and pluginBreno Lima6-6/+6
2018-12-18MLK-20493-6 imx8mq_evk/arm2: Set usb to be super speedLi Jun2-0/+8
2018-12-12MLK-20542 imx8qm: xen: mek: add magic numberPeng Fan1-2/+7
2018-12-11MLK-20528-2 imx8: Enable clocks LPCGYe Li4-0/+52
2018-11-26MA-13453-1 Add new board target imx8mq_aiyJi Luo10-0/+3528
2018-11-20MLK-20394 imx8mq: Update the ddrc QoS setting for B1 chipBai Ping1-6/+10
2018-11-12Revert "[iot] Decrease panbell DDR frequency to 1600 MTS"Keun-young Park2-1889/+2230
2018-11-12[iot] Support authenticated unlockJi Luo1-2/+2
2018-11-12[iot] Load Trusty to different address for AIY 1G/3G ddr boardJi Luo1-0/+19
2018-11-12Use stdint for uboot.Yu Shan1-0/+19
2018-11-12Set different bootargs for imx8m_phanbell based on ram capacityfaqiang.zhu1-0/+10
2018-11-12Set VDD_ARM to 0.85v and turn off VDD_GPU and VDD_VPUfaqiang.zhu1-0/+9
2018-11-06MLK-20257 imx8qxp_arm2: Fix NAND boot reset issueYe Li1-0/+6
2018-11-02MLK-20163-03 board: imx8mq_evk: Refact the imx8mq dram init codeBai Ping10-1734/+4053
2018-11-02MLK-10163-01 imx8mq: Re-desine the dram_pll_init functionBai Ping2-2/+2